Hello and welcome to our community! Is this your first visit?
Register
Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    All hail ZOM Woz's Avatar
    Join Date
    Dec 2012
    Posts
    5,477
    Likes (Given)
    128
    Likes (Received)
    2564

    Paramina Typhoon 15E silent compressor with very low hours

    Selling on behalf of Nottingham Uni SAC.

    The club was donated an almost brand new compressor. Bought by the University engineering department for a project, it was bought in 2016 (2015 year of manufacture), used for a whopping 21 hours then they switched it off and walked away. They were going to chuck it in a skip, but someone knew one of our members and asked if we wanted it so it's with me here at work.

    It's rated at 250 lpm and will pump happily to 320 bar. Comes complete with a thick walled double ended 50L (approx) 414 bar air receiver- I think these just need a visual and never need a hydro as they are not transportable. It weighs 135kg...!

    The compressor itself weighs 250kg and needs 3 phase to run it (has a 5.5kW drive). It will also need a fill whip or connecting to an existing panel. You can see the thing running near M1 J26. Has all sorts of fully and semi-auto functions on it via the controller panel.

    Link to the model here:
    http://www.paramina-compressors.com/...ent-breathing/

    3000, collect from Nottingham, or transport can be arranged at cost (you will need a fork lift to offload it)









    Last edited by Woz; 04-07-2022 at 12:19 PM.
    I have nothing to do with BSAC any more apart from being a muggle member. So anything I write on here is likely to be complete bollocks. Hooray!

  2. #2
    Banned
    Join Date
    Jun 2014
    Location
    Broadway Cotswolds
    Posts
    1,826
    Likes (Given)
    227
    Likes (Received)
    821
    Quote Originally Posted by Woz View Post
    Selling on behalf of Nottingham Uni SAC.

    used for a whopping 21 hours then they switched it off and walked away.
    Can I get a visual indicator with that?

  3. #3
    Established TDF Member jamesp's Avatar
    Join Date
    Dec 2012
    Location
    Wrexham
    Posts
    5,632
    Likes (Given)
    2802
    Likes (Received)
    2128
    Quote Originally Posted by iain/hsm View Post
    Can I get a visual indicator with that?
    Why, do you actually have any?

  4. #4
    Banned
    Join Date
    Jun 2014
    Location
    Broadway Cotswolds
    Posts
    1,826
    Likes (Given)
    227
    Likes (Received)
    821
    Quote Originally Posted by jamesp View Post
    Why, do you actually have any?
    Many hundreds ex stock. But Trade only.

  5. #5
    Established TDF Member jamesp's Avatar
    Join Date
    Dec 2012
    Location
    Wrexham
    Posts
    5,632
    Likes (Given)
    2802
    Likes (Received)
    2128
    Quote Originally Posted by iain/hsm View Post


    Many hundreds ex stock. But Trade only.
    Does that include slat wall rinky dinks, or do you need a NATO part number to go with the bog roll?

  6. #6
    Established TDF Member Paulo's Avatar
    Join Date
    Dec 2012
    Location
    Ireland
    Posts
    14,135
    Likes (Given)
    5765
    Likes (Received)
    5283
    Blog Entries
    1
    Quote Originally Posted by jamesp View Post
    Does that include slat wall rinky dinks, or do you need a NATO part number to go with the bog roll?
    You need a trade account and have been on an approved buyer list since 1972
    JJ wanker

  7. #7
    Established TDF Member Energy58's Avatar
    Join Date
    Jun 2014
    Location
    London at the moment
    Posts
    2,072
    Likes (Given)
    331
    Likes (Received)
    562
    There is something wrong if that was about to end up scrapped...

  8. #8
    Banned
    Join Date
    Jun 2014
    Location
    Broadway Cotswolds
    Posts
    1,826
    Likes (Given)
    227
    Likes (Received)
    821
    Quote Originally Posted by Energy58 View Post
    There is something wrong if that was about to end up scrapped...
    There was, There is. Here goes.

    It's on thing for Nottingham University to put out an open tender for a high pressure air compressors for the little sprogs under the universities care to jack around with.

    Another to shell out hard earned grant money for the cheapest tendered product that met the minimum standard requirement on the tender document for a HP air compressor.

    My guess is it was quite another after 20 hours of running to find out that there is no certification worth a jot and no CE mark on the date plate. ROFL no
    Last edited by iain/hsm; 04-07-2022 at 08:42 PM.

  9. #9
    Established TDF Member
    Join Date
    Jan 2013
    Posts
    1,823
    Likes (Given)
    201
    Likes (Received)
    781
    Quote Originally Posted by Woz View Post
    Selling on behalf of Nottingham Uni SAC.

    The club was donated an almost brand new compressor. Bought by the University engineering department for a project, it was bought in 2016 (2015 year of manufacture), used for a whopping 21 hours then they switched it off and walked away. They were going to chuck it in a skip, but someone knew one of our members and asked if we wanted it so it's with me here at work.

    It's rated at 250 lpm and will pump happily to 320 bar. Comes complete with a thick walled double ended 50L (approx) 414 bar air receiver- I think these just need a visual and never need a hydro as they are not transportable. It weighs 135kg...!

    The compressor itself weighs 250kg and needs 3 phase to run it (has a 5.5kW drive). It will also need a fill whip or connecting to an existing panel. You can see the thing running near M1 J26. Has all sorts of fully and semi-auto functions on it via the controller panel.

    Link to the model here:
    http://www.paramina-compressors.com/...ent-breathing/

    3000, collect from Nottingham, or transport can be arranged at cost (you will need a fork lift to offload it)










    Got it for free by donation- sounds like the right thing to do is donate it to someone/something worthy

  10. #10
    Established TDF Member
    Join Date
    Jan 2013
    Location
    NE UK
    Posts
    713
    Likes (Given)
    8
    Likes (Received)
    156
    Quote Originally Posted by graham_hk View Post
    Got it for free by donation- sounds like the right thing to do is donate it to someone/something worthy
    Lots of struggling clubs and worthwhile diving project groups around these day who could do with that bit of help


    Sent from my iPhone using Tapatalk


 
Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •