Tweet
I've now sold my CCR. My aim is to slim down my collection of dive gear to leave me with a single cylinder set up. Hopefully that will get a bit of use over the next few years.
That leaves a fair amount of kit that I now have no need for. P&P to be discussed. I'll try and sort photos out asap.
AP Decanting Hose (DIN to bullnose) - £70
Fitting available for a couple of quid from AP if you wanted it to be DIN - DIN. I've only ever used this to fill O2 rebreather cyls from O2 bank
Decanting Hose (DIN to DIN) - £30
This was used for diluent fills. Much better gauge than the AP hose and a bleed screw but I wouldn't use it for O2.
Digital Pressure Gauge - £45
O2 analyser - SOLD
ATX40 & DS4 Stage Regs. - £145
Gauge on 6" hose - Green LP inflate
ATX40 & DS4 Stage Regs. - SOLD
Kent Tooling Reel - £70
Halycon DSMB (Tall Slim) - £70
1.8m. LP inflate. Long webbing tail removed
7L Ali Cyl 208bar White (Out of Test) -£50
7L Ali Cyl 208bar Raw (Out of Test) - £50
7L Ali Cyl 232bar - £60
Stage Rigging - £5
Gucci Halcyon Rigging - £10
12L Euro Twinset (Out of Test) - £200
That leaves a fair amount of kit that I now have no need for. P&P to be discussed. I'll try and sort photos out asap.
AP Decanting Hose (DIN to bullnose) - £70
Fitting available for a couple of quid from AP if you wanted it to be DIN - DIN. I've only ever used this to fill O2 rebreather cyls from O2 bank
Decanting Hose (DIN to DIN) - £30
This was used for diluent fills. Much better gauge than the AP hose and a bleed screw but I wouldn't use it for O2.
Digital Pressure Gauge - £45
O2 analyser - SOLD
ATX40 & DS4 Stage Regs. - £145
Gauge on 6" hose - Green LP inflate
ATX40 & DS4 Stage Regs. - SOLD
Kent Tooling Reel - £70
Halycon DSMB (Tall Slim) - £70
1.8m. LP inflate. Long webbing tail removed
7L Ali Cyl 208bar White (Out of Test) -£50
7L Ali Cyl 208bar Raw (Out of Test) - £50
7L Ali Cyl 232bar - £60
Stage Rigging - £5
Gucci Halcyon Rigging - £10
12L Euro Twinset (Out of Test) - £200
. but you never know
Comment