So I'm a fan of the one piece harness in theory but since getting Kubi dry gloves I've found that I struggle a bit getting the dry glove rings out from under it when taking off the wing at the end of a dive. I dive a standard SS back plate with stiff webbing one piece harness. I got it second hand and the original set up had an extension break put in that I really didn't find very useful and generally got in the way. Now, for travel I've also got a travel backplate with soft webbing that has a great feature, the webbing will happily slip through the d-ring it runs through at the bottom of the back plate(as it's a material plat so no webbing running through it). This is great because the shoulder straps are basically adjustable when the waist buckle is unclipped as the webbing runs free.
Is there a way to replicate this with a typical SS backplate? I've looked at some kind of D-ring set that might replicate the travel backplate set up. The closes thing I've seen is Agir Harpa that seems to come with their harness set and costs a bomb. Not sure if there's an alternative generic d-ring I could get my hands on.
Failing that would just replacing the stiff webbing with soft webbing work (obviously just requiring a new harness a bit more frequently)? If so any recommendations on where to pick up the appropriate stuff, possibly with a selection of colours (I can do black if that's the option. I have also ended up with a couple of metres of uselessly flimsy 2" webbing so I'm not buying anything without a recommendation )