Search:

I can maybe put you in touch drop me a PM if Janos contact doesn't sort you out

Is that indicating both CO and water in the same housing? Or do you need two of them?

You got the answer right there...

Think you are right it is going to result in changes in legislation, probably misguided, probably unenforced by the dibble except to annoy the wrong people.

it's probably available on the archive.org wayback machine

used to get a supply of stripped chicken carcasses for my hound from the local asian slaughterhouse. used to quarter them about 50kg at a time and freeze them. feed them frozen that way no smell in...

I built one years back, the guy who printed the kits of parts for those would dissolve a bit of his target plastic in some solvent and put a thin wipe of that down on the (glass) bed. The solvent...

I'm on FMCL for hydrostatic work of breathing reasons.

Previous home made MAVs (for bmcl) had normal nipples on them, was better for a few reasons, had a QC6 so I could access the on board O2 into...

Sounds a bit complicated to me, how many bottles regs and valves do you want to keep track of?

I'm weighted to be about neutral with empty tanks on the unit in fresh, add 2kg for sea. Torch reels...

I've never had one but parts wise, was there really much to go wrong? Presume props/clutches are the widely copied and available one.

Wondering if I got a cheap one it could be good for converting...

I was looking at this seems there is quite a bit of variation in the motors which will affect it, there are low and high rpm windings and different brush setups. (high rpm motor, lithium no voltage...

Wut? How? Unless you're starting to express your lats and longs in radians?

yup... :)

low range 2.2rpm that's a bit of torque!

Our WB's at work cut less than true, reckon 30 years of cutting 60 rockwell C chrome iron has got to them a bit (plus whatever they did for the previous 30...

Jay the modelling / printing side are largely separate - you can create the .stl files on most 3D CAD systems to then send to your slicer. Quality of what you get out of the CAD systems varies, I've...

Anyone got a table for moisture capacity of air at typical pressure we are talking about for compressors and filters? Moisture capacity drops as pressure increases so it's not just a simple solution...

"Low pressure" is fine
"Totally empty" can let water in if someone for example left the valve open

Dry suit speciality? Have they been sniffing glue? Active UK divers are about least likely people to have that BS, probably find more people with it who qualified in the maldives and have never dived...

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6205931/

Yes I wondered same thing myself and I cannot see any reason why it would need to be that way, the proper studies that have used VGE as outcome measurements haven't had to send stuff off. Is it just...

"The diver then needs to input the depth, immersion time, dive duration, and stops performed in order to allow analysis."

Seems mad that it doesn't need ascent rate data, especially given that...

Sure it was just for recovering the excess methanol your honour

Are all new apeks regs and spares going to have a bit of garlic scent to them now?

Illegal without a licence.
I have heard of small home licenses for <5l stills being issued.

Few year ago one of locals wanted a 80l dairy tank fitting out with a couple of bungs for immersion...

You don't get rid of the methanol by making scumble, it gives you a bitch of a hangover

With beer just waiting will cure a multitude of sins, surprised how much some of them change with a few months ageing.
Too sweet you might be able to get round by re pitching a different yeast and...