Colin,
P'm interested, I have sent you a PM
I've sent you a PM
Type: Posts; User: Simon A
Colin,
P'm interested, I have sent you a PM
I've sent you a PM
All the boats I've been on out of Sharm are 2 dive day boats.
If you want to just do 1 dive per afternoon, you may get a better result trying Dahab, as it's mostly shore diving at Dahab
The charger you have would work eventually, but it would take something like 2 days to charge the battery which explains why it would barely start.(I once used one to charge a car battery and it took...
As said above, Charger is under spec, so the battery wasn't charged much, but once the boat was started it charged the battery.
It's a SLA so almost no self discharge. Have you considered fitting a...
steve,
it's the same manual and kit as a tx50
they are very similar
HTH
Simon A
Narked@90 are big on flow modeling. I suspect they could tell you over the phone.
If you think about it, the cable goes in a dia bigger than the connection on the end of the breathing hose, I'd have...
Matt,
this was probably not manufactured as a dust cap. One of the Generations of MDE modular Valves used them to seal the manifold hole if you were not fitting a manifold.
Rocky,
Now you have some more experience under your belt it should be a "normal" dive.
Enjoy the course
Is it still the same Rangie that you had to hack the suspension on when the dealer couldn't work out what was causing it to go into Limp home mode?
Pea Cake,
I think that Dobo may have been looking at the contract that you didn't sign?
And if you need Nigel's full expertise, I suspect a day rate of £1k is a little on the low side....
The quick answer is if you don't know the advantages, then you don't need one. :)
If you are hosting anything on your connection that other people can access (web sever or website, or for the old...
I run mainly Apeks regs, except for travel where I use the Scubapro Mk2 and R190 combo, they are simple, they just keep working, and if I was to do some thing silly, spares are available almost...
Apparently the Boris was not designed as a recreational rebreather, it was designed to be used from a diving bell to dive Britanic, but they never managed to get a bell on site. The selling of the...
Ring Suunto,
Depending on workload they may be able to do it while you wait.
As Timmyg says contact some of the UK instructors, and find out who is running courses in Malta, quite a few decamp out there for a few weeks and run a load of courses so id your dates match up then...
Nigel,
Might take a bit of work, but how about:-
Buy a sheet of white Delrin (or yellow if you can get it)
make bracket to mount Hud to side of HUS (may need to twist it 90 degrees to how the AP...
I go and do the occasional OC dive, which confirms my SAC is still crap and I'd best plan bailout at a SAC of 25l/min
I love my Apeks regs so I'd vote for the DS$/ATX40 combo. But if you can live with the hose routing a scubapro Mk2 would be my choice for international travel, they are common as muck so you are...
Well, in 2007 I paid £900 for the canister, scrubber,working head, and the white plastic mouthpiece parts. And they have depreciated a bit since then.
I'd like to dream it's worth £500 , but...
edit- Scratch that, have now found where listed.
Rocky,
When you go to Egypt, ask for a 15L cylinder and just enjoy the diving. It should be nice and easy. If it's OK with the guide, just practice putting up an SMB every dive. Put it up a couple...
TBH 10 bar on any gauge tends to be so-so, I would suggest that at this stage of your diving career you should aim to be starting your safety stop before or as you hit 50 bar. Otherwise you are not...
Stevie,
As long as you understand the sorb is more than twice as expensive as any other rebreather (or someone else is paying for it) then a P7 should allow you some nice rebreather diving. Then I'd...
Go on treat yourself to the posh version http://www.conrad-electronic.co.uk/ce/en/product/123101
The extra bits are worth the additional £6
O2 cleaning at 15 months is a dive industry standard.
The HSE standard is until the cylinder valve is taken out for testing or other work, or if there is a suspicion it may have been contaminated....