Recently upgraded to v2.7 and noticed that the ccr setpoint menu has a new addition for Dil pre-sets. Previously, dil was set up in the gaslist alongside other gases. I am now assuming the dil list is the only place to set up dil settings and the gas list for bailout mixes. Be careful of this as it's not in the latest documentation and could catch you out if still thinking you use the gaslist to set dil. Miss it and it'll assume you are using an air dil.
OSTC - CCR Setpoint Menu
Collapse
X
-
Tags: None
-
-
Comment
-
OSTC - CCR Setpoint Menu
Thanks Major. You raise an excellent point and something I'd missed! I only received my CCR back a few days ago and the few dives I've been getting in have been on OC.
The move from 2.5 to 2.7 is quite significant as it brings the menu system more into alignment with the 3. If I get a chance later I'll compile the differences from the release notes and let you know.Comment
-
What to do? I only have three bullets and there are four of motley crew...Comment
-
OSTC - CCR Setpoint Menu
There are fixes, revisions and features between the two but it'll take me some time to compile (some time when I'm not toddler juggling).Comment
-
As an aside, since upgrading to 2.70 from previous stable release, i ( and i believe a couple of others on the OSTC forum) have been getting some very strange(excessive) NDL when running in CC algorithm as a backup to my hardwired Predator on the JJ. HW could not replicate thus far, and dive profile extracts from me and others showed some very weird NDL (until hitting deco and then all was good and matched the Predator) I think we have sorted now, but need to get it wet again to confirm ( simulator now appears to be correct )
You need to make sure the 1st dil gas is set to active and we had to reset deco data in between upgrades/downgrades to beta's and restoring all current CF's etc to get it to (hopefully) work....
JezComment
-
yes
That had me confused...but as default DIL was 21% and gas list was 21% and I was using air.. I didn't notice till I changed first gas to 16/45 and dil showed as air... I had a good hunt round till I spotted the DIL menu, changed it and all was sorted.. nothing in the V3 PDF manual on HW and I posted a mention on the HW forum44 years diving - must be doing it right!Comment
-
OSTC - CCR Setpoint Menu
I ran the dive simulator after the update to make sure I got what I expected.GaryLComment
-
Here is a list of all published changes between 2.50 GA and 2.70 GA. 2.71 beta is not included:
CHANGE: show old decoplan after gas change until new decoplan is ready
CHANGE: ostc3-style menu titles
NEW: Vault date and time during update
BUGFIX: no flicker when powering on
CHANGE: 256ms switch debounce timer
BUGFIX: CNS compute. NOAA tables are in ATA, not bar
CHANGE: Set default for CF64 (Color inactive) to 103 (light blue)
BUGFIX: Vault low_depth too
BUGFIX: Ascent to first stop in finer steps (Deko spikes)
CHANGE: Removed Mix type Icons and CF43
CHANGE: Hardware4 support
CHANGE: Use 4Bytes in EEPROM for diluents (Same as OC gases)
NEW: Show active gas indicator below first gas in surfacemode
UPDATE: OSTC interface description file
NEW: Hard-coded min. Values for CF00 and CF01
CHANGE: Set cursor to Exit when leaving some sub-menus
CHANGE: Set CF17 (ppo2_warning_low) low level to 0.16bar
NEW: Confirmation when marker is set
BUGFIX: Decoplan update after GF change
NEW: CF70: Safety Stop Duration [s]
NEW: CF71: Safety Stop Start Depth [m]
NEW: CF72: Safety Stop End Depth [m]
NEW: CF73: Safety Stop Reset Depth [m]
CHANGE: GF_hi default now 85 (CF33)
NEW: aGF: Alternative GF (CF67 and CF68). Can be switched underwater if CF69=1
NEW: CF67: aGF_lo []
NEW: CF68: aGF_hi []
NEW: CF69: Allow GF change (underwater)
CHANGE: Deco model default now is L16-GF OC (OC, GF-Deco)
BUGFIX: Gas volumes when many tanks and stops
BUGFIX: show first diluent in simulator result screen (Instead of first gas)
NEW: Allow any Diluent to be First Gas in CCR mode
BUGFIX: Allow Diluents with more then 50 He
CHANGE: Max. Depth text position
NEW: 5 Gases extra for CC
NEW: Divisor Decoplan (CF25) stores entire decoplan in logbook
NEW: CF29 stored in divelog header (Byte 52)
BUGFIX: Gas Setup when using ERR Gases (e.g. NX17)
NEW: Saves last selected custom view for surface mode and dive mode
NEW: Gaslist highlights better gas in divemode
NEW: Cursor is in front of the better gas automaticallyComment
Comment