PDA

View Full Version : Kiss classic scrubber orings



Digger180
17-07-2013, 10:07 AM
Does anybody know where I could get orings for ck scrubber that isn't in Canada. I've had a look at places on line but none seem to have ones with the same dimensions.

notdeadyet
17-07-2013, 10:30 AM
Polymax or BSL if you know the sizes. IIRC the manual listed all the orings.

Sent from my GT-I9100 using Tapatalk 2

Digger180
17-07-2013, 11:23 AM
The sizes are,

ID-4 3/4 OD-5 CS-1/8
ID-5 OD-5 1/4 CS-1/8
The cross section works out at 3.175mm but all I can find is 3mm or 3.53mm

Digger180
17-07-2013, 11:35 AM
Am I just shit at maths and 3.53 is the one I'm looking for :)

Capt Morgan
17-07-2013, 11:42 AM
Are you back diving the CK then ?

smudger
17-07-2013, 11:44 AM
Does anybody know where I could get orings for ck scrubber that isn't in Canada. I've had a look at places on line but none seem to have ones with the same dimensions.

I have Bags of the bloody things they are in dry storage and never been used "O" rings for every thing on Kiss I am in Guildford?

Digger180
17-07-2013, 03:37 PM
Are you back diving the CK then ?

Never been off it

Kiss183
17-07-2013, 08:05 PM
Calling Andy.... StoneyFrog.... where are you...? He gets min for me :)



And I thought you'd sold it..?

Digger180
17-07-2013, 08:24 PM
No I had two managed to buy one that had all the mods I wanted built one with all the bits I wanted added the mods I had. Sold off a load of bits and a standard unit and ended up with a stainless case 3 hiser dumpy cylinders shearwater HUD and cooper hoses for my favourite price of fook all

WFO
13-08-2013, 03:05 PM
The sizes are,

ID-4 3/4 OD-5 CS-1/8
ID-5 OD-5 1/4 CS-1/8
The cross section works out at 3.175mm but all I can find is 3mm or 3.53mm

try a bs248 and bs250

They are 3.53 but that is AS568 standard size. If they're a bit chunky it might just not go together, if it goes together ok then it should seal fine.

Janos
14-08-2013, 06:59 AM
Bs248 and bs250 ring some bells for me too.

I used to get all my o-rings from polymax.co.uk
There's a full list of sizes in the CK manual (downloadable from jetsam)
I also bought 20 of the breathing hose o-rings as I found they got chewed up reslitevly quickly and if you've got 20 for 10p each you're not so fussed.

If the head sticks be careful. It could be the scrubber tube going out of round. Happened to me and I had a full flood at 60m...

Janos