View Full Version : New Cylinders for JJ Rebreather

30-01-2015, 09:06 PM
Apart from buying Cylinders direct from JJ, who can recommend to me where can I buy new 3ltr cylinders for my breather in the UK.

30-01-2015, 09:24 PM
Apdiving ones would work fine.

30-01-2015, 09:41 PM
any old O2 clean 3L on offer. my preferance is faber 232 but you can get a god know's what it is godive 3L for 79 inc valve if your feeling lucky. swap the valve for the one from your old cylinder job done.

30-01-2015, 09:45 PM
I got my extra cylinders for the JJ in Amphibian Sports.

31-01-2015, 12:23 PM
I use 250 Bar 3l dumpies with L & R modular valves. They seem to route more easily than the Inspo-type valves.

02-02-2015, 12:58 PM
The standard Cylinders on the JJ are Euro 300bar with Nautec valves. I much prefer them to the lighter AP ones that I had. I got my extra cylinders from Aquanaut in Plymouth, not sure whre the Nautec valves came from - either direct from JJ, Revo or Auquanauts.
The Nautec valves have a really nice action but be aware that if you get the current M26 valve some M26/DIN adapters do not seal properly, I use a 300bar adapter which works OK.

02-02-2015, 01:16 PM
Cheers Scotty,

Beneficial advice, will give Aquanuats a call and see what they can do.