Ostc in CCR mode

[Vanny]

Morning ,

Recently switched to an inspo and using my ostc 2n in ccr mode. After a weekends diving after every dive the ostc hasn't recorded any surface interval (show 00.00) any desat or no fly times.
It knows I've dived , the dive is logged , during the dive it looks accurate, running v similar to the vision computer, also for subsequent dives so it appears to be accounting for a tissue loading.

This info isn't essential but has always been there following open circuit dives and makes me wonder if I have a gremlin in there. Running version 2.9. Anyone else had this?

[Vanny]

Anyone ??

[BTS]

I get desat and no fly times on mine regardless of CCR or OC modes, you may want someone to look at it...

[dwhitlow]

I get desat and no fly times too.

Have you changeds any of the customer functions from default? Might be worth running through those and checking they have appropriate settings.

[Vanny]

Cheers

[BTS]

These are the CF for V2.5

http://divezone.pl/images/produkty/HMcomp/OSTC-Custom-Functions-EN-V250.pdf

a quick skim shows number 13, no fly as a percentage of total desat but I don't see anything else, pop over the the HW ostc forum. Htere are some very helpful folks on there. The software monkey for one...

[Vanny]

Thanks

[Vanny]

Custom functions seem ok, not touched anything from OC settings. Battery is running about 50% , hope to dive next weekend will fully charge check firm ware down loaded ok. Will try ccr again and if not working put it into OC and see if it calculates surface info there. Not much more info from HW forum so if problem continues will return to deep ideas.

[miko1979]

custom function latest file:

http://forum.heinrichsweikamp.com/file.php?2,file=403,filename=OSTC_Custom_Functions_EN_V270.pdf

make the update to OSTC to and then make a reset from the unit
Menu
Reset Menu
Reset CF , Gas Deco
config your OSTC 2N Gas changes , Diluent, Time,CF....
the easiest way is contact HW via email, the Support is very fast

[Vanny]

Cheers , will contact HW direct if the problem persists.

[germie]

contact HW. I don't have that problems. I like the computer really much.

[Vanny]

Update !

After a good charge and reloading the firmware, 2.90, diving last weekend all seems well again.

Thanks for the replies.

[dwhitlow]

Update !

After a good charge and reloading the firmware, 2.90, diving last weekend all seems well again.

Thanks for the replies.

maybe it was sulking because you we not taking it diving enough

Good news. Glad all is good